mmbz5225-g to mmbz5267-g www.vishay.com vishay semiconductors rev. 1.3, 11-feb-13 1 document number: 85183 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 small signal zener diodes features ? silicon planar power zener diodes. ? standard zener voltage tolerance is 5 % with a b suffix (e.g.: mmbz5225b-g), suffix c is 2 % tolerance ? high temperature soldering guaranteed: 260 c/4 x 10 s at terminals ? aec-q101 qualified ? esd capability according to aec-q101: human body model > 8 kv machine model > 800 v ? base p/n-g3 - green, commercial grade ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 primary characteristics parameter value unit v z range nom. 3 to 75 v test current i zt 1.7 to 20 ma v z specification thermal equilibrium int. construction single 12 3 ordering information device name ordering code taped units per reel minimum order quantity mmbz5225-g to mmbz5267-g mmbz5225b-g3-08 to mmbz5267b-g3-08 3000 (8 mm tape on 7" reel) 15 000/box mmbz5225c-g3-08 to mmbz5267c-g3-08 mmbz5225b-g3-18 to mmbz5267b-g3-18 10 000 (8 mm tape on 13" reel) 10 000/box mmbz5225c-g3-18 to mmbz5267c-g3-18 package package name weight molding compound flammability rating moisture sensitivity level soldering conditions sot-23 8.1 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power dissipation on fr - 5 board using recommended solder pad layout p tot 225 mw on alumina substrate p tot 300 mw zener current see table electrical characteristics thermal resistance, junction to ambient air on fr - 5 board using recommended solder pad layout r thja 556 k/w junction temperature, maximum t j 150 c storage temperature range t stg - 65 to + 150 c operating temperature range t op - 55 to + 150 c
mmbz5225-g to mmbz5267-g www.vishay.com vishay semiconductors rev. 1.3, 11-feb-13 2 document number: 85183 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ?maximum v f = 0.9 v, at i f = 10 ma (1) measured at thermal equilibrium (2) the zener impedance is deri ved from the 1 khz ac voltage which results when an ac current having an rms value equal to 10 % of the zener current (i zt1 or i zt2 ) is superimposed on i zt1 or i zt2 . zener impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range (1) test current reverse leakage current dynamic resistance (2) temperature coefficient v z at i zt1 i zt1 i zt2 i r at v r z z at i zt1 z zk at i zt2 ? vz v ma a v ? %/c nom. max. max. max. typ. mmbz5225-g 725 3 20 0.25 50 1 30 1600 - 0.075 mmbz5226-g 726 3.3 20 0.25 25 1 28 1600 - 0.07 mmbz5227-g 727 3.6 20 0.25 15 1 24 1700 - 0.065 mmbz5228-g 728 3.9 20 0.25 10 1 23 1900 - 0.06 MMBZ5229-G 729 4.3 20 0.25 5 1 22 2000 - 0.055 mmbz5230-g 730 4.7 20 0.25 5 2 19 1900 0.030 mmbz5231-g 731 5.1 20 0.25 5 2 17 1600 0.030 mmbz5232-g 732 5.6 20 0.25 5 3 11 1600 0.038 mmbz5233-g 733 6 20 0.25 5 3.5 7 1600 0.038 mmbz5234-g 734 6.2 20 0.25 5 4 7 1000 0.045 mmbz5235-g 735 6.8 20 0.25 3 5 5 750 0.05 mmbz5236-g 736 7.5 20 0.25 3 6 6 500 0.058 mmbz5237-g 737 8.2 20 0.25 3 6.5 8 500 0.062 mmbz5238-g 738 8.7 20 0.25 3 6.5 8 600 0.065 mmbz5239-g 739 9.1 20 0.25 3 7 10 600 0.068 mmbz5240-g 740 10 20 0.25 3 8 17 600 0.075 mmbz5241-g 741 11 20 0.25 2 8.4 22 600 0.076 mmbz5242-g 742 12 20 0.25 1 9.1 30 600 0.077 mmbz5243-g 743 13 9.5 0.25 0.5 9.9 13 600 0.079 mmbz5244-g 744 14 9 0.25 0.1 10 15 600 0.082 mmbz5245-g 745 15 8.5 0.25 0.1 11 16 600 0.082 mmbz5246-g 746 16 7.8 0.25 0.1 12 17 600 0.083 mmbz5247-g 747 17 7.4 0.25 0.1 13 19 600 0.084 mmbz5248-g 748 18 7 0.25 0.1 14 21 600 0.085 mmbz5249-g 749 19 6.6 0.25 0.1 14 23 600 0.086 mmbz5250-g 750 20 6.2 0.25 0.1 15 25 600 0.086 mmbz5251-g 751 22 5.6 0.25 0.1 17 29 600 0.087 mmbz5252-g 752 24 5.2 0.25 0.1 18 33 600 0.087 mmbz5253-g 753 25 5 0.25 0.1 19 35 600 0.089 mmbz5254-g 754 27 4.6 0.25 0.1 21 41 600 0.09 mmbz5255-g 755 28 4.5 0.25 0.1 21 44 600 0.091 mmbz5256-g 756 30 4.2 0.25 0.1 23 49 600 0.091 mmbz5257-g 757 33 3.8 0.25 0.1 25 58 700 0.092 mmbz5258-g 758 36 3.4 0.25 0.1 27 70 700 0.093 mmbz5259-g 759 39 3.2 0.25 0.1 30 80 800 0.094 mmbz5260-g 760 43 3 0.25 0.1 33 93 900 0.095 mmbz5261-g 761 47 2.7 0.25 0.1 36 105 1000 0.095 mmbz5262-g 762 51 2.5 0.25 0.1 39 125 1100 0.096 mmbz5263-g 763 56 2.2 0.25 0.1 43 150 1300 0.096 mmbz5264-g 764 60 2.1 0.25 0.1 46 170 1400 0.097 mmbz5265-g 765 62 2 0.25 0.1 47 185 1400 0.097 mmbz5266-g 766 68 1.8 0.25 0.1 52 230 1600 0.097 mmbz5267-g 767 75 1.7 0.25 0.1 56 270 1700 0.098
mmbz5225-g to mmbz5267-g www.vishay.com vishay semiconductors rev. 1.3, 11-feb-13 3 document number: 85183 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward characteristics fig. 2 - admissible power dissipation vs. ambient temperature package dimensions in millimeters (inches): sot-23 18114 ma 10 3 10 2 10 -1 10 -2 10 -3 10 -4 10 -5 10 1 i f v f 0 0.2 0.4 0.6 0.8 1v t j = 100 c t j = 25 c 18672 0100200c 250 mw 200 150 100 50 0 p tot t am b foot print recommendation: rev. 8 - date: 23. s ept.2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
